HOMEAbout KAMACHO › Calibration Equipments

Calibration Equipments

Our company arranges calibration equipments and establishes reliable calibration system.

It's possible to calibrate the weight from 1mg to 2t which is highest level in Japan according to JCSS.

There is the calibration room controlled strictly by the conditions of atmospheric pressure, temperature and humidity and it's possible to calibrate the weight from 1mg to 2t which is highest level in Japan according to JCSS in order to keep the quality of the weight calibration test. We can provide you with JCSS calibration service which is required to ensure the traceability of weight and is optimum to construct the quality system.

About JCSS

What is calibration company registration system(JCSS)?

The first calibration room
The range of calibration:1mg to 20kg

The environmental condition
・Temperature:16 to 25 degree Celsius
・Humidity:35% to 80%
・Atmospheric pressure:995hPa to 1035hPa

The second calibration room
The range of calibration:20kg to 2000kg

The environmental condition
・Temperature:12 to 25 degree Celsius
・Humidity:35% to 80%
・Atmospheric pressure:995hPa to 1035hPa

There is the equipment(50t)for load cell performance test which is the maximum in Japan.

The equipment for load cell performance test which our company has is the maximum in Japan because the maximum weight is 50t and we can test the mass detector(load cell).Because the hoist medium load method(the direct load method)is adopted and we can put the standard weight directly on load cell which has capacity of 10t to 50t, there is a few causes of error and it's possible to measure with high accuracy.

The equipment for load cell performance test
The maximum weight:50t(2t × 25 weights)
The range of test temperature:-10 to 50 degree Celsius
The range of humidity test:relative humidity 50%, 85%
The creep test and load test are possible.

Top of page