TEL

お問い合わせ

Truck scale with the function of 3-D center of gravity measurement / satrs

safety transport support system / satrs

三次元重心測定機能付きトラックスケール

Ensure safety and relief of truck transport. Prevent sideslip accident !
It’s possible to measure balance of vehicles front and rear or right and left or the height with 3-D.
We developed jointly with Yokohama Harbor Freight Measurement Institute.

img_satrs
サトルス

Characteristics

1.High-speed measurement which doesn't affect distribution

  • It’s possible to measure over 1200 vehicles per day (30 sec. per vehicle) if you measure with 3-D.
  • It takes only additional about 3 to 5 seconds to normal measurement time to carry out Measurement Certification Business.

The operational method(3-D Measurement + Measurement Certificate)

1.Before riding

Operational method step 1: before riding. The truck stops on the tilting table located on the truck scale.

2.After riding

Step 2: after riding. The truck stops temporarily on the tilting table; 3-D measurement is complete when the outlet crossing gate opens (3 to 5 seconds).

3.Truncatiotion for Measurement Cetrificate

Step 3: after 3-D measurement, the weight can be measured for a measurement certificate.

4.Remove tractor

Step 4: remove the tractor and measure the weight of only the container and chassis for the measurement certificate.

The operational method (Only 3-D Measurement)

1.Before riding

Operational method step 1: before riding. The truck stops on the tilting table located on the truck scale.

2.After riding (stop on the tilting table)

Step 2: after riding. The truck stops temporarily on the tilting table; 3-D measurement is complete when the outlet crossing gate opens (3 to 5 seconds).

2.Expression Technology

  • Express by simple illustration.
  • It’s possible to deliver measurement cut-form to third person.

The result of offset load measurement(3-D measurement)

Indicator screen showing the center of gravity (balance indicated by a straight line in the illustration), axle weight and wheel weight.

Measurement cut-form

Measurement certificate printing the offset load: balance between right and left and between front and rear, center of gravity, height, entry speed, axle weight and wheel weights (sample from Yokohama Harbor Freight Measurement Institute).

3.Relieve economic work load

  • It’s possible to add to or modify existing scale(Digital load cell and Touch-panel indicator).

Offset load detection system of front, rear, right and left direction

Offset load detection system of front, rear, right and left direction: digital load cells detect the load, axle weight is detected as the wheels go on board, and a position sensor compensates it.

Offset load detection system of height direction

Offset load detection system of height direction: the center of gravity is found from the load cell values by solving the inverse problem of an inverted pendulum.

CONTACT

弊社製品に関するご質問やお問い合わせ、
資料請求について、以下の方法をご利用ください。